Product ID:VICTREX PEEK 450CA30, 764-930-000
MSDS Date:12/06/1990
FSC:9330
NIIN:00N020956
MSDS Number: BLLND

Emergency Phone: 302-886-3000

Info Phone: 215-363-4500

Cage: IO069

Telephone: 215-363-4500/302-886-3000

Cage: 0NRS2

VICTREX PEEK

CAS: 29658-26-2

Fraction By Weight: 66-76%

CARBON FIBER

CAS: 744-44-0

Fraction By Weight: 22-32%

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL:PARTICULATE FILLERS CAN IRRITATE
UPPER RESPIRATORY PASSAGES. OTHER:PARTICULATE FILLER ARE INERT,
HOWEVER, ABRASIVE & IRRITANT CHARACTERISTICS MAY BE NOTED AFTER
PARTICULATE CONTACT W/SKIN OR MUC OUS MEMBRANES & NOSE.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:SKIN:WASH MATERIAL OFF W/PLENTY OF SOAP & WATER. IF REDNESS,
ITCHING OR BURNING SENSATION DEVELOPS, GET MD. FOR THERMAL BURNS,
COOL QUICKLY W/WATER & GET MD. DO NOT PEEL OFF SOLIDIFIED MATERIAL.
EYE:I MMEDIATELY FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINS &
HAVE EYES EXAMINED & TREATED BY MD. INHAL:REMOVE TO FRESH AIR.
SUPPORT BREATHING (GIVE O2/ARTF RESP) . INGEST:CALL MD IMMED .

Extinguishing Media:WATER FOG, FOAM, CARBON DIOXIDE & DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:PRODUCT WILL BURN. SMOKE EMISSION IS LOW.
DUST REQUIRE HIGH TEMPERATURE IGNITION SOURCE TO IGNITE.

Spill Release Procedures:NO SPECIAL PRECAUTIONS REQUIRED.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN A COOL, DRY WAREHOUSE.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:IF NEEDED USE A NIOSH/MSHA APPROVED RESPIRATOR
FOR DUST & VAPORS.
Ventilation:PROVIDE LOCAL EXHAUST TO REMOVE DECOMPOSITION FUMES &
CONTROL EXPOSURE LEVELS.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:IMPERVIOUS APRON FOR PROTECTION FROM THERMAL
EFFECTS WHEN HANDLING MOLTEN MATERIAL.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:633F,334C
Spec Gravity:1.4 +/- .2
Solubility in Water:INSOLUBLE
Appearance and Odor:GREY BROWN ODORLESS PELLET.
Percent Volatiles by Volume:NEGLIG

Stability Indicator/Materials to Avoid:YES
CONCENTRATED SULFURIC ACID.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CARBON MONOXIDE & CARBON DIOXIDE.

Waste Disposal Methods:DISPOSAL PROCEDURES FOR SOLID WASTE IN
ACCORDANCE W/LOCAL, STATE & FEDERAL REGULATIONS. DISCARDED PRODUCT
IS NOT A HAZARDOUS WASTE UNDER RCRA 40 CFR 261.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.